ZBA F A Q
ZBA Home | FAQ Home
Search Term:
What Do I Do With The CD That Is In The Box? : ZBA F A Q



Q: What Do I Do With The CD That Is In The Box?

Nothing! Your New Scanner is Plug and Play.

Plug and Play (PnP) is a capability that gives users the ability
to plug a device into a computer and have the computer
recognize that the device is there.

The CD is Not necessary for installation. It does NOT contain
any Drivers. There are no Drivers needed for PS2 Scanners.
The Windows or MAC Systems will automatically load the
Drivers for USB Scanners.

The CD merely contains Reference Materials such as detailed
Programming Manuals and Product Information regarding
ZBA’s Line of Products and Services.

Please Note that our address has changed to:
94 Old Camplain Road, Hillsborough, NJ 08844

Default Settings for ALL Scanners:
Trigger Mode
Carriage Return
Minimum Length (for ZB8000 Series) If your barcode has less
than four characters, you have to program the scanner to
recognize barcodes with less than four digits.

PLEASE NOTE THAT OUR SCANNERS ARE NOT LASER
SCANNERS. THEY ARE CCD SCANNERS WHICH EMIT A
LIGHTED BAR THAT IS MUCH WIDER THAN THE THIN LINE OF
A LASER BEAM.

ZB8000 Series Scanners - If you would like to change the
scanner to Triggerless Mode (the light will Always stay on)
Please Click here for ZB8000 series – OR - Click here for Z-
3080 and print out the Set Up sheet and scan each of the
Barcodes.

If you would like to change the scanner from Carriage Return
to a Tab, Please Click here for ZB8000 series – OR - Click
here for Z-3080 and print out the Set Up sheet and scan each
of the Barcodes.

If your barcode has less than four characters (ZB8000 Series
Scanners only), Please Click here and print out the Set Up
sheet and scan each of the Barcodes.

For any other types of programming, please refer to the
Applicable Manual that appears on the CD. Note: for ZB8000
series scanners. The information on Page 7 of the Manual
(PROGRAMMING THE 8110/8150/8210) will guide you on how
to properly use the pages in the manual.


For Curves Customers Only:
if you have upgraded your computer system, do not use any
set up sheets YOU MAY HAVE AT YOUR CLUB. IF YOUR
SCANNER WAS WORKING PRIOR TO THE CHANGE, IT WILL
WORK WITH YOUR NEW SYSTEM TOO, AS LONG AS YOU ARE
USING THE SAME CABLE FOR THE SCANNER.